Building Kitchen Base Cabinet Carcass with Super EASY Drawer Method

TEMPLATE: Here’s the free universal template for any width base cabinet that you can use to create almost any straight base cabinet: https://shelfhelpnow.com/blogs/templates/frameless-kitchen-base-cabinet

CONFIGURATOR: The configurator can be used to have your plywood shipped to you precut https://shelfhelpnow.com/pages/shelf-configurator

EDGE BANDING: The front plywood edges of a frameless cabinet need to be finished. If you use Shelf Help, the plywood pieces come prefinished with factory edge banding.

DOORS: I built my own doors but didn't want to show the tutorial until we make sure they don't warp out on us. Basically just a 1×4 frame pocket holed together and then routered out the back side and inset 1/4" plywood. For now, recommending ordering doors, I've used Barker Door and Cabinet Now, both are reasonably priced and great.

DRAWER FACE: I designed this cabinet so the drawer face is just a 1×6. I used poplar.

HARDWARE/PAINT/HINGES ETC: The template has this information https://shelfhelpnow.com/blogs/templates/frameless-kitchen-base-cabinet

Tweet
Pin
Share